Delta bathtub faucet manual

Pop out the index button with your fingers, or use a screwdriver to pry it out of the handle. Use a Phillips screwdriver and remove the handle screw. The handle should pull off easily. You do not need to remove the screw completely. The lever handle should now come off without any trouble. Unscrew the stem bonnet nuts. Under the handle, you will see a hexagon shaped nut holding the Delta faucet stem in place.

Use an adjustable crescent wrench to loosen the nut by turning it counterclockwise, and then remove it by hand. Pull the stems up and out of the faucet. Remove the seats and springs. Use a pair of tweezers or the small Allen wrench to pry out the old seats and springs.

Clean the inside of the stem barrels. If you notice a whit mineral deposit buildup inside the faucet, use a scouring pad and a little vinegar to sand it off.

Turn the water supply valves on one at a time, just enough to wash out any remaining debris. Insert new seats and springs. Slide the small opening end of the rubber seat onto the Allen wrench or a small screwdriver, followed by the small end of the metal spring.

Delta provides guides on how to fit faucets in sinks baths and also for showers, with manuals for every type of faucet, which they sell. When you opt to use their products you can rely on things working as they should do. Delta will include all the things needed to install or assemble a shower including screws and Allen wrenches. Most people that will attempt to assemble their own shower faucets will already have screwdrivers, Teflon tape, and a soldering iron.

Should any part of the Delta shower faucet need to be replaced then simply buy a new part. Then repeat parts of the above process to fit the new part precisely where it needs to go. There will be no problem in obtaining new faucets and other parts from Delta, either directly or from other sellers. Delta products are widely available both online and in-store.

Manuals are widely available for Delta products, either in paper format or electronically in pdf format. If this is a broken piece, you will need to purchase a repair kit or other replacement parts. If a piece has somehow managed to bend out of shape without breaking, you may be able to fix the problem by bending the piece back. However, if you do not understand what caused the piece to bend in the first place, this may not be the end of your problems.

Repairing Delta faucets is easy if you know what you are doing and purchase the correct parts. Delta faucet problems can include leaking or dripping from the faucet or handle, a jammed faucet or a faucet with temperature control that is not performing properly.

Before you begin to diagnose or repair the problem, always make sure that you shut off the water supply to the faucet that you are working on at the time.

Delta Monitor faucet disassembly is easy, provided you follow the supplied instructions.